A nitrogen cabin needs more from its room than any other CTN system. None of it is difficult, but all of it must be planned before the cabin arrives. This guide covers the room for a CRYO°CABIN™.
The cabin itself
| Dimensions | W 880 × D 1320 × H 2590 mm |
| Net weight | 300 kg |
| Power | 1500 W, 230 V |
The footprint is small. The height is not. At 2590 mm the cabin is taller than many standard ceilings, so measure the lowest point of the room, including beams, ducts and light fittings.
Room size
We plan on about 12 m² as a working estimate: the cabin, a changing area and room for the operator. We confirm the real figure on a site visit, because the position of the gas vessel changes the layout.
Ventilation
This is the part you cannot skip. Nitrogen gas is not toxic, but it displaces oxygen in a closed space. Plan for:
- Mechanical ventilation sized for the room, on the advice of your ventilation engineer and gas supplier.
- Oxygen monitoring where your supplier and local rules call for it.
- A clear exit that is never blocked by stock or furniture.
The cabin adds its own protection, with a dual emergency shut-off and active ventilation. The room must still be right.
Where the gas lives
Your supplier provides a pressurised storage vessel and tells you where it may stand. Think about:
- A short, protected line between the vessel and the cabin.
- Access for the delivery driver, ideally without crossing client areas.
- A floor that copes with a full vessel being rolled across it.
Deliveries
Ask the supplier how often they will deliver and at what times. A delivery during your busiest hour is a problem you can avoid on paper.
A simple layout that works
Place the cabin against the wall nearest the vessel. Put the changing area on the opposite side, so clients never walk past the gas line. Keep the operator's position where they can see both the cabin screens and the door.
Checklist for your architect
- Ceiling height of at least 2590 mm plus working clearance.
- Ventilation design signed off for nitrogen use.
- Vessel location agreed with the gas supplier.
- Delivery route that avoids client areas.
- A normal 230 V socket for 1500 W.
If this list looks heavy for your building, the electric e°CABIN™ needs only a dedicated 16 A circuit. Send us your floor plan on WhatsApp and we will advise.
