MomentumCTN.FI · RO · HU

Fitting a LedPro™ Vertical into a small space

The standing booth needs about four square metres, a strong floor and a dedicated circuit. A setup guide for gyms, studios and offices.

The main reason operators choose the LedPro™ Vertical over a bed is floor space. A standing booth fits where a bed cannot. It does bring one requirement of its own: weight.

The numbers

Dimensions H 224 × W 86 × D 120 cm
Weight 250 kg (350 kg packed)
Maximum power 3000 W
Supply 230 V / 50 Hz

Floor space

We work with about 4 m² as an estimate. That covers the booth, its door swing and a place to change. The booth itself stands on roughly one square metre.

The floor

250 kg on a footprint of about one square metre is a concentrated load. On a ground floor slab this is rarely a concern. On an upper floor, or on a raised gym floor, ask your building engineer before ordering.

The route in

The crate weighs 350 kg and the booth is 224 cm tall. Measure doorways, lifts and corners. We survey the route with you before delivery.

Ceiling

You need at least 224 cm plus working clearance. Check for sprinklers, ducts and light fittings above the planned position.

Power

Up to 3000 W. Run a dedicated circuit to the booth's position.

Ventilation

Like any 3 kW device, the booth warms a small room. Provide extraction or air conditioning.

Three layouts that work

In a gym. A small room off the changing area. Members go from training to the booth without crossing reception.

In a studio. A corner cubicle with a curtain or sliding door, beside the cryotherapy cabin. Clients move from cold to light in a few steps.

In an office. A lockable wellness room. The standing format and 15 minute session suit a working day. See a recovery room your employees actually use.

Privacy

Clients undress to expose skin to the light, so the changing space must be private and lockable, even if it is small.

Sound and vibration

The booth has a vibration plate and plays sound. On a suspended floor, vibration can carry to the room below. Test it once it is installed, and add an isolating mat if your installer advises one.

Changeover

Standing sessions change over quickly. Plan a 25 minute booking: 15 minutes of session and 10 for changing and a wipe down.

Before you commit

Send us the room size, floor type and a photo of the ceiling on WhatsApp. We will tell you whether the booth fits, or whether a bed in a different room is the better plan.

Găsește sistemul potrivit